Static Ropes, Carabiners & Righting the Raft | The Gear Garage Live Show
This podcast is the audio version of the Gear Garage Live Show, where we answer submitted questions and talk all things whitewater.
In this episode, Zach takes a deep dive into Personal Rescue Equipment (PRE), specifically focusing on the flip line. While it seems like a simple piece of webbing, there is a lot of debate around the length, the type of webbing used, and whether or not to use locking carabiners. Zach also answers viewer questions about the mechanics of righting a flipped raft and how to stay safe while doing it.
Flip Lines: The Setup
Zach starts by breaking down his personal flip line setup. The “standard” for most guides is about 10 to 12 feet of 1-inch tubular webbing.
- Tubular vs. Flat Webbing: Zach highly recommends tubular webbing. It’s easier on the hands, holds knots better, and has a higher breaking strength for this specific application.
- The Length: While 10 feet is standard, Zach discusses why taller guides or those running high-frame gear boats might prefer 12 feet to get more leverage.
- The Knot: Most guides use a simple water knot to create a loop, but Zach discusses the pros and cons of keeping it as a single line with a carabiner on one end.
The Carabiner Debate: To Lock or Not?
One of the most contentious topics in raft rescue is the carabiner on your flip line.
- Non-Locking: The argument here is speed. In a high-stress flip situation, you want to be able to clip and pull immediately.
- Locking: The safety argument is that a non-locking carabiner can accidentally “gate-load” or clip onto something it shouldn’t (like your own PFD or another rope), creating a snag hazard.
- Zach’s Take: Zach leans towards the efficiency of a non-locking gate but emphasizes that gear choice should always be dictated by your specific comfort level and the type of water you are running.
Righting the Raft
Flipping a boat back over isn’t just about strength; it’s about physics. Zach breaks down the “lean back” technique:
- High Side/Low Side: Identify where the current is pushing the boat.
- The Foot Placement: Get your feet high on the side of the tube to create a pivot point.
- The Weight: Use your body weight, not your arm strength.
- The “Pop”: For larger gear boats, Zach discusses using a second person or a “Z-drag” style setup if the boat is pinned or suctioned to the water.
Personal Rescue Equipment (PRE)
The show wraps up with a discussion on what else should be on your person. Zach emphasizes that your flip line shouldn’t be your only tool. A high-quality whistle, a reliable river knife (accessible with either hand), and a throw bag should be the foundation of your kit before you start worrying about advanced mechanical advantage hardware.
The Donner und Blitzen River
Zach highlights the "Blitzen" as one of the most elusive and rewarding high-desert runs in Oregon. Because it relies entirely on snowmelt from the Steens Mountains, the window to boat it is incredibly "flashy", often opening and closing within a matter of days. Zach emphasizes that this isn't a run for heavy gear boats; the narrow, continuous nature of the canyon requires nimble craft like small catarafts or 12-foot rafts. He notes that while the logistics are simple (no permit required), the technicality and remote location mean your team needs to be self-sufficient and ready for a "no-swim" environment.
Connect with Us
Catch every new episode of the Gear Garage Live Show by subscribing on your favorite podcast platform. For rafting trips, guide training, and expert resources, visit Northwest Rafting Company and the Whitewater Guidebook.
Hosted by Zach Collier | Produced by Northwest Rafting Company
